Sunday, August 5, 2018

Netgear n300 wifi range extender setup ex2700


Are you looking for Netgear n300 wifi range extender setup ex2700. Then once go through this article. Because in this article we have discussed about how to setup Netgear n300 wifi range extender.

How to setup Netgear n300 wifi range extender?

1- You must Install your extender in the same room as the Wi-Fi router.
2- Then you must check that your internet is active connection and which must be coming from the main router.
Netgear extender setup

3- Then you have to plug in your router extender at the electrical outlet and then wait for the at the extender LED is blinking in green colour.
And if it is does not blink then you have to turn on your router through side panel on and off button, then wait for few minutes then again turn on your extender.

factory default settings netgear wifi extender n300 device

4- Then you have to Connect your computer with the extender via ethernet cable.
mywifiext net setup wizard

5- Now open any of the web browser on to your computer which is connected with the extender, then on the address bar on the web browser enter your router default IP address. Then press enter.
6- Now a new login page of your router will open where you have to enter your router Default username and password.
7- Then you have to Wait for then NETGEAR genie scanning your WiFi network.
8- Now it will display the available network which is available within the range of the extender, then you have to select your network and click Continue.
mywifiext net setup

9- Now you have to enter the password of your main wireless network and click Continue.
10- Then the name of your wireless network followed by _EXT at the end.
11- Once you have connected your wireless devices to the new network then you have to click on the Finish button to complete the installation and Netgear n300 wifi range extender login.

Sunday, July 29, 2018

Samsung Smartcam model SNH 1011n


If we talk about Smartcam SNH 1011n then itcomes with a very sleek design and constructed of white plastic with a big eye like lens over  LED indicator to tell you which mode is on in camera,it also comes withSamsung Smartcam model SNH 1011nnecessary hardware for mounting the camera to wall or ceiling.

Performance and features:

The videostream from the sitcom is great,video looks pretty good in light the infrared night vision works like charm for low situations the view in dark is good to other cameras. The best thing about is being mobile is viewing video while you out of house Samsung Samsung Smartcam model SNH 1011n delivers that mobility with a free app available in the app store.

Samsung Smartcam model SNH 1011n


The performance delays occur despite Samsungsmart cam ability to differentiate between access on local network, it enters a relay mode where video goes to internet first then back to you in relay mode streaming video connection is limited to three minutes which you can extend viewing time that nice Samsung cuts down on company server load, in practice thesmart cam site asked to extend viewing time browser plugin google chrome,even when the camera is jammed in the corner.

Read Here: 




Cameras are set to trigger motion and sound, camera record video 10 seconds in default and here you receive email alerts and you can push notification whenever camera triggered.

Schedule mode tell your Arlo system enter modes at same  time every week, here you turn indoor camera  off at night here outdoor camera the time you can turn  from 8am to 5 pm geo fencing  mode like schedule mode,Arlo system switch to another mode this mode is working on GPS with mobile device, your mobile is more certain distance from location you choose from arlo system.

Friday, July 20, 2018

connecting a Linksys smart wifi router


Connecting a Linksys smart Wi-Fi router

A Linksys smart wireless router will help in interaction with mobile applications. For instance, applications can change router settings, screen organizes gadgets, confine access to specific sites, see arrange cameras live and peruse or stream photographs. With Smart Wi-Fi, you surf through the Linksys Smart Wi-Fi or AUTO_FON organize. By differentiate, the Wi-Fi Hotspots have a system name that contains the word FON.
In the event that you associate by means of Smart Wi-Fi, you keep your Internet association while signing in. With a Wi-Fi Hotspot, your Internet association might be lost for a couple of moments amid the change from 3G/4G to Wi-Fi. Facing problem while connecting a Linksys smart Wi-Fi router via HTTP //extender.linksys.com setup?

How to connect a Linksys smart Wi-Fi router?


Step 1: First of all, one has to connect the computer to the wireless smart Wi-Fi router using Ethernet cable. 
linksys extender setup

Step 2: After that, you have to connect the primary router to the internet port of the smart Wi-Fi router from Linksys. 

http extender Linksys com re6500

Step 3: Once the above step successfully completed, you have to connect the power adapter to a power plug and give power to the smart Wi-Fi router.    
Step 4: You will see the IP address of the Linksys Wi-Fi router will automatically change the IP address. To know about the changed IP address, you can access it through command prompt.
Now, you can move with the securing Linksys Wi-Fi router. In case, you want to change the IP address manually then, it will auto detect and change the IP addresses automatically http //extender linksys.com Wi-Fi setup page.
Your router has the ability to interface different devices in the system, for example, cell phones, tablets, diversion consoles, and printers. For more information or query, you can write down in the comments.

Tuesday, July 10, 2018

linksys wireless extender setup re6500


If you have recently bought your linksys extender setup re6500, you may be searching for the right steps that will help in setting up of wireless extender re6500. 

From this blog, you will get the steps that will help you in setting up of Linksys wireless extender whether it is using the wifi protected setup or the embedded setup wizard or WPS.

Things that you must know before following to the procedure

The name of the wireless network or the SSID
Security key or the password, which is case sensitive in nature

Here are the necessary steps for doing the procedure

Step 1: Make the connection of the antennas as well as the power adapter along with the power outlet. Make sure that the antennas are pointing upwards which will provide you the right and the best performance.

Step 2: Place your wifi range extender between the router that you are using and the area which is having around 50% of the signal of the wifi that you are using.

Linksys router extender re6500 setup


Step 3: Check for the solid light on your wifi range extender which will take around two minutes.


http extender Linksys com re6500


Step 4: Make the connection of your device along with the wifi range extender.


 a.       If you are using the mode for the wired setup:  


make the connection of the device which is linksys extender setup re6500 and the Ethernet cable and then connect the other end along with the computer. Before proceeding just check that you must not have the wireless type of internet connection.

b.      If you are using the wireless setup type of network connection:

 through your wireless device which may be laptop of your mobile make the connection between the network by entering the details of the password. 

For the users of the Linksys extender setup, just enter the detail of the last three character of the MAC address of range extender.

Thursday, July 5, 2018

How to Cancel Office 365 for business


Here you cancel your office 365 for commercial trail or your paid payment online in the office 365 admin midpoint at any time if you have less than 25 certificates office 365 login mail assigned to users.in some cases might have to call support to cancel your subscription:

If you purchased your payment with office 365 product key
you have more than 25 certificates allocated to users.

For any other subscriptions in Microsoft dynamics 365 or Microsoft in tune

office 364 login

Change custom province setting:

If your custom province with your office 365 extra DNS before you remove your province sure to update DNS records such as your province MX best to your DNS host so email sent to province stops coming to office 365 address and goes to your new email breadwinner instead, Your name server records are pointing to office365 name servers. your MX greatest  your users know the date you will shift their email to the new breadwinner

Update your domain:

If you switched your name server records to office 365 when you set up a domain you must set up domain 

Save your data- your users lose admission to their 365 office the termination become actual so have your user save One Drive for commercial online files to another location before you cancel the subscription, to move contacts, tasks, email, calendar information to another account, to save document library or list content from SharePoint online environment office 365 login mail One Drive for business team sites.

Cancel your subscription – if you added own domain name to use office 365 remove the domain before you cancel your subscription.
·         In the Admin go to subscriptions page.
·         On the subscriptions page select subscription.
·         From more movements menu choose cancel payment.
·         Review important dates provide response about you are stopping then select cancel subscription