linksys wireless extender setup re6500

If you have recently bought your linksys extender setup re6500, you may be searching for the right steps that will help in setting up of wireless extender re6500. 

From this blog, you will get the steps that will help you in setting up of Linksys wireless extender whether it is using the wifi protected setup or the embedded setup wizard or WPS.

Things that you must know before following to the procedure

The name of the wireless network or the SSID

Security key or the password, which is case sensitive in nature

Here are the necessary steps for doing the procedure

Step 1: Make the connection of the antennas as well as the power adapter along with the power outlet. Make sure that the antennas are pointing upwards which will provide you the right and the best performance.

Step 2: Place your wifi range extender between the router that you are using and the area which is having around 50% of the signal of the wifi that you are using.

Step 3: Check for the solid light on your wifi range extender which will take around two minutes.

Step 4: Make the connection of your device along with the wifi range extender.

 a.       If you are using the mode for the wired setup:  

make the connection of the device which is linksys extender setup re6500 and the Ethernet cable and then connect the other end along with the computer. Before proceeding just check that you must not have the wireless type of internet connection.

b.      If you are using the wireless setup type of network connection:

 through your wireless device which may be laptop of your mobile make the connection between the network by entering the details of the password. 

For the users of the Linksys extender setup, just enter the detail of the last three character of the MAC address of range extender.